 |
Laws of New York (Last Updated: November 21, 2014) |
 |
ADC New York City Administrative Code(NEW) |
|
Title 28. NEW YORK CITY CONSTRUCTION CODES |
|
Chapter 7. THE NEW YORK CITY BUILDING CODE |
|
Article 701. ENACTMENT AND UPDATE OF THE NEW YORK CITY BUILDING CODE |
Section 28-701.2C35. REFERENCED STANDARDS
Latest version.
-
SECTION BC 3501 GENERAL 3501.1 General. This chapter lists the standards that are referenced in various sections of this document. The standards are listed herein by the promulgating agency of the standard, the standard identification, the effective date and title and the section or sections of this document that reference the standard. 3501.2 Subsequent additions, modifications, or deletions. Refer to the rules of the department for any subsequent additions, modifications or deletions that may have been made to these standards in accordance with Section 28-103.19 of the Administrative Code. 3501.3 Applicability. The application of the referenced standards shall be as specified in Section 102.4. SECTION BC 3502 STANDARDS Aluminum Association AA 900 - 19th Street N.W., Suite 300 Washington, DC 20006 ________________________________________________________________________ Standard Reference Number Title ------------------------------------------------------------------------ ADM 1--00 Aluminum Design Manual: Part 1-A Aluminum Structures, Allowable Stress Design; and Part 1-B--Aluminum Structures, Load and Resistance Factor Design of Buildings and Similar Type Structures ASM 35--80. Aluminum Sheet Metal Work in Building Construction American Architectural Manufacturers Association AAMA 1827 Waldon Office Square, Suite 104 Schaumburg, IL 60173 ________________________________________________________________________ Standard Reference Number Title ------------------------------------------------------------------------ 1402--86 Standard Specifications for Aluminum Siding, Soffit and Fascia 101.I.S.2--97 Voluntary Specifications for Aluminum, Vinyl (PVC) and Wood Windows and Glass Doors 101.I.S.2/ Voluntary Performance Specification for Window, NAFS--02 Skylights, and Glass Doors American Concrete Institute ACI P.O. Box 9094 Farmington Hills, MI 48333-9094 ________________________________________________________________________ Standard Reference Number Title ------------------------------------------------------------------------ 216.1--97 Standard Method for Determining Fire Resistance of Concrete and Masonry Construction Assemblies 318--02 Building Code Requirements for Structural Concrete 530--02 Building Code Requirements for Masonry Structures 530.1--02 Specifications for Masonry Structures TG/T1.1--01 Acceptance Criteria for Moment Frames Based on Testing American Forest&Paper Association AF&PA 1111 19th St, NW Suite 800 Washington, DC 20036 ________________________________________________________________________ Standard Reference Number Title ------------------------------------------------------------------------ AF&PA/ASCE Standard for Load and Resistance Factor Design (LRFD) 16--95 for Engineered Wood Construction WCD No. 4--89 Plank and Beam Framing for Residential Buildings WFCM--01 Frame Construction Manual for One-and Two-family Dwellings T.R. No.7--87 Basic Requirements for Permanent Wood Foundation System NDS--01 National Design Specification (NDS) for Wood Construction with 2001 Supplement AF&PA--93 Span Tables for Joists and Rafters American Hardwood Association AHA 1210 West N.W. Highway Palatine, IL 60067 ________________________________________________________________________ Standard Reference Number Title ------------------------------------------------------------------------ A135.4--95 Basic Hardboard A135.5--95 Prefinished Hardboard Paneling. A135.6--98 Hardboard Siding A194.1--85 Cellulosic Fiber Board American Institute of Steel Construction AISC One East Wacker Drive, Suite 3100 Chicago, IL 60601-2001 ________________________________________________________________________ Standard Reference Number Title ------------------------------------------------------------------------ 335--89s1 Specification for Structural Steel Buildings--Allowable Stress Design and Plastic Design, including Supplement No.1, 2001 LRFD (1999) Load and Resistance Factor Design Specification for Structural Steel Buildings HSS (2000) Load and Resistance Factor Design Specification for Steel Hollow Structural Sections 341--02 Seismic Provisions for Structural Steel Buildings American Iron and Steel Institute AISI 1140 Connecticut Avenue Suite 705 Washington, DC 20036 ________________________________________________________________________ Standard Reference Number Title ------------------------------------------------------------------------ NASPEC 2001 North American Specification for Design of Cold-Formed Steel Structural Members General Standard for Cold-Formed Steel Framing-General Provisions, 2001 Header Standard for Cold-Formed Steel Framing-Header Design, 2001 Truss Standard for Cold-Formed Steel Framing-Truss Design, 2001 American Institute of Timber Construction AITC Suite 140 7012 S. Revere Parkway Englewood, CO 80112 ________________________________________________________________________ Standard Reference Number Title ------------------------------------------------------------------------ AITC A190.1--92 Structural Glued Laminated Timber AITC Technical Calculation of Fire Resistance of Glued Laminated Timbers Note 7--96 AITC 104--84 Typical Construction Details AITC 110--01 Standard Appearance Grades for Structural Glued Laminated Timber AITC 112--93 Standard for Tongue-and-Groove Heavy Timber Roof Decking AITC 113--01 Standard for Dimensions of Structural Glued Laminated Timber AITC 117--01 Standard Specifications for Structural Glued Laminated Timber of Softwood Species--Design Requirements--Standard Specifications for Structural Glued Laminated Timber of Softwood Species--Manufacturing Requirement AITC 119--96 Standard Specifications for Structural Glued Laminated Timber of Hardwood Species AITC 200--92 Inspection Manual AITC 500--91 Determination of Design Values for Structural Glued Laminated Timber Automotive Lift Institute ALI P.O. Box 33116 Indialantic, FL 32903-3116 ________________________________________________________________________ Standard Reference Number Title ------------------------------------------------------------------------ ALI ALCTV--98 Standard for Automotive Lifts--Safety Requirements for Construction, Testing and Validation (ANSI) American National Standards Institute ANSI 25 West 43rd Street Fourth Floor New York, NY 10036 ________________________________________________________________________ Standard Reference Number Title ------------------------------------------------------------------------ A 13.1--96 Scheme for the Identification of Piping Systems A 42.2--71 Portland Cement and Portland Cement Lime Plastering, Exterior (Stucco) and Interior A 42.3--71 Lathing and Furring for Portland Cement and Portland Cement Lime Plastering, Exterior Stucco and Interior A 108.1A--99 Installation of Ceramic Tile in the Wet-set Method, with Portland Cement Mortar A108.1B--99 Installation of Ceramic Tile, Quarry Tile on a Cured Portland Cement Mortar Setting Bed with Dry-set or Latex-Portland Mortar A 108.4--99 Installation of Ceramic Tile with Organic Adhesives or Water-cleanable Tile-Setting Epoxy Adhesive A 108.5--99 Installation of Ceramic Tile with Dry-set Portland Cement Mortar or Latex Portland Cement Mortar A 108.6--99 Installation of Ceramic Tile with Chemical-resistant, Water Cleanable Tile-setting-and-grouting Epoxy A 108.7--92 Specification for Electrically Conductive Ceramic Tile Installed with Conductive Dry-set Portland Cement Mortar A 108.8--99 Installation of Ceramic Tile with Chemical-resistant Furan Resin Mortar and Grout A 108.9--99 Installation of Ceramic Tile with Modified Epoxy Emulsion Mortar/Grout A 108.10--99 Installation of Grout in Tilework A 118.1--99 American National Standard Specifications for Dry-set Portland Cement Mortar A 118.2--99 American National Standard Specifications for Conductive Dry-set Portland Cement Mortar A 118-3--99 American National Standard Specifications for Chemical-resistant, Water-cleanable Tile-setting and -Grouting Epoxy and Water Cleanable Tile-setting Epoxy Adhesive A 118.4--99 American National Standard Specifications for Latex-portland Cement Mortar A 118.5--99 American National Standard Specifications for Chemical Resistant Furan Mortar and Grouts for Tile Installation A 118.6--99 American National Standard Specifications for Cement Grouts for Tile Installation A 118.8--99 American National Standard Specifications for Modified Epoxy Emulsion Mortar/Grout A 136.1--99 American National Standard Specifications for Organic Adhesives for Installation of Ceramic Tile A 137.1--88 American National Standard Specifications for Ceramic Tile A 208.1--99 Particleboard B 31.3--99 Process Piping--Including Addendum Z 97.1--84 Safety Glazing Materials Used in Buildings-safety (R 1994) Performance Specifications and Methods of Test (Reaffirmed 1994) APA - Engineered Wood Association APA P.O. Box 11700 Tacoma, WA 98411-0700 ________________________________________________________________________ Standard Reference Number Title ------------------------------------------------------------------------ APA PDS--97 Plywood Design Specification (revised 1998) APA PDS Design and Fabrication of Plywood Curved Panels Supplement (revised 1995) 1--90 APA PDS Design and Fabrication of Plywood-lumber beams Supplement (revised 1998) 2--92 APA PDS Design and Fabrication of Plywood Stressed-skin Panels Supplement (revised 1996) 3--90 APA PDS Design and Fabrication of Plywood Sandwich Panels Supplement (revised 1993) 4--90 APA PDS Design and Fabrication of All-plywood Beams Supplement (revised 1995) 5--95 EWS R540--96 Builders Tips: Proper Storage and Handling of Glulam Beams EWS S475--99 Glued Laminated Beam Design Tables EWS S560--99 Field Notching and Drilling of Glued Laminated Timber Beams EWS T300--99 Glulam Connection Details EWS X440--00 Product Guide-Glulam EWS X445--97 Glulam in Residential Construction--Southern Edition EWS X450--97 Glulam in Residential Construction--Western Edition American Society of Agricultural Engineers ASAE 2950 Niles Road St. Joseph, MI 49085-9659 ________________________________________________________________________ Standard Reference Number Title ------------------------------------------------------------------------ EP 484.2 (1998) Diaphragm Design of Metal-Clad, Post-Frame Rectangular Buildings EP 486.1 (2000) Shallow-Post Foundation Design EP 559 (1997) Design Requirements and Bending Properties for Mechanically Laminated Columns American Society of Civil Engineers ASCE/SEI Structural Engineering Institute 1801 Alexander Bell Drive Reston, VA 20191-4400 ________________________________________________________________________ Standard Reference Number Title ------------------------------------------------------------------------ 3--91 Standard Practice for the Construction and Inspection of Composite Slabs 5--02 Building Code Requirements for Masonry Structures 6--02 Specifications for Masonry Structures 7--02 Minimum Design Loads for Buildings and Other Structures 8--90 Standard Specification for the Design of Cold-formed Stainless Steel Structural Members 16--95 Standard for Load Resistance Factor Design (LRFD) for Engineered Wood Construction 19--96 Structural Applications of Steel Cables for Buildings 24--05* Flood Resistant Design and Construction 29--99 Standard Calculation Methods for Structural Fire Protection 32--01 Design and Construction of Frost Protected Shallow Foundations *As modified in Appendix G American Society of Mechanical Engineers ASME Three Park Avenue New York, NY 10016-5990 ________________________________________________________________________ Standard Reference Number Title ------------------------------------------------------------------------ A17.1--00* Safety Code for Elevators and Escalators with supplements A17.1a--02 and A17.1b--03 A18.1--99 Safety Standard for Platform Lifts and Stairway Chairlifts--with Addenda A18.1a-2001 A90.1--97 Safety Standard for Belt Manlifts--with Addenda A90.1a-99 B16.18--84 Cast Copper Alloy Solder Joint Pressure Fittings (R 1994) B16.22--95 Wrought Copper and Cooper Alloy Solder Joint Pressure Fittings--with Addenda B16.22a-98 B20.1--03* Safety Standard for Conveyors and Related Equipment *As modified in Appendix K ASTM International ASTM 100 Barr Harbor Drive West Conshohocken, PA 19428-2959 ________________________________________________________________________ Standard Reference Number Title ------------------------------------------------------------------------ A 6/A 6M--01b Specification for General Requirements for Rolled Steel, Structural Steel Bars, Plates, Shapes, and Sheet Piling A 36/A 36M--00 Specification for Carbon Structural Steel A 82--01 Specification for Steel Wire, Plain, for Concrete Reinforcement A 123/A 123M-- Specification for Zinc (Hot-Dip Galvanized) Coating on 97el Iron and Steel Products A 153--01a Specification for Zinc Coating (Hot-Dip) on Iron and Steel Hardware. A 167--99 Specification for Stainless and Heat-Resisting Chromium-Nickel Steel Plate, Sheet and Strip A 185--01 Specification for Steel Welded Wire Reinforcement, Plain for Concrete A 252--E01 Specification for Welded and Seamless Steel Pipe Piles A 283/A Specification for Low and Intermediate Tensile 283M--00 Strength Carbon Steel Plates A 307--00 Specification for Carbon Steel Bolts and Studs, 60,000 psi Tensile Strength A 416--99 Specification for Steel Strand, Uncoated Seven-Wire for Prestressed Concrete A 421/A Specification for Uncoated Stress-Relieved Steel Wire for 421M--98 Prestressed Concrete A 435/A Specification for Straight-Beam Ultrasonic Examination 435M--90 of Steel Plates (2001) A 496--01 Specification for Steel Wire, Deformed for Concrete Reinforcement A 510--00 Specification for General Requirements for Wire Rods and Coarse Round Wire, Carbon Steel A 568/A Specification for Steel, Sheet, Carbon, and High-Strength, 568M--01 Low-Alloy, Hot-Rolled and Cold-Rolled, General Requirements for A 572/A Specification for High-Strength Low-Alloy 572M--01 Columbium-Vanadium Structural Steel A 588/A Specification for High-Strength Low-Alloy Structural 588M--01 Steel with 50 ksi (345 Mpa Minimum Yield Point to 4 inches (100 mm) Thick A 615/A Specification for Deformed and Plain Billet-Steel Bars 615M--00 for Concrete Reinforcement A 641/A Specification for Zinc-coated (Galvanized) Carbon Steel 641M--98 Wire A 653/A Specification for Steel Sheet, Zinc-coated Galvanized or 653M--01a Zinc-iron Alloy-Coated Galvannealed by the Hot-dip Process A 706/A Specification for Low-Alloy Steel Deformed and Plain 706M--00 Bars for Concrete Reinforcement A 706/A Specification for Low-Alloy Steel Deformed and Plain 706M--01 Bars for Concrete Reinforcement A 722/A Specification for Uncoated High-Strength Steel Bar for 722M--98 Prestressing Concrete A 755/A Specification for Steel Sheet, Metallic-Coated by 755M--01 the Hot-Dip Process and Prepainted by the Coil-Coating Process for Exterior Exposed Building Products A 767/A Specification for Zinc-coated (Galvanized) Steel Bars 767M--00b for Concrete Reinforcement A 775/A Specification for Epoxy-Coated Steel Reinforcing Bars 775M--01 A 792/A Specification for Steel Sheet, 55% Aluminum-Zinc 792M--01a Alloy-Coated by the Hot-Dip Process A 875M--99a Specification for Steel Sheet Zinc-54% Aluminum Alloy-Coated by the Hot Dip Process A 884--99 Specification for Epoxy-Coated Steel Wire and Welded Wire Fabric for Reinforcement A 898/A Specification for Straight Beam Ultrasonic Examination 898M--91 of Rolled Steel Shapes (2001) A 899--91 Specification for Steel Wire Epoxy-Coated (1999)S A 913/A Specification for High-strength Low-Alloy Steel 913M--01 Shapes of Structural Quality, Produced by Quenching and Self-tempering Process (QST) A 951--00 Specification for Masonry Joint Reinforcement A 996/A Specification for Rail-Steel and Axle-Steel Deformed Bars 996M--00 Reinforcement for Concrete A 1008--01A Specification for Steel, Sheet, Cold-Rolled, Carbon, Structural, High-Strength Low-Alloy and High-Strength Low-Alloy with Improved Formability B 42--98 Specification for Seamless Copper Pipe, Standard Sizes B 43--98 Specification for Seamless Red Brass Pipe, Standard Sizes B 68M--99 Specification for Seamless Copper Tube, Bright Annealed (Metric) B 88--99el Specification for Seamless Copper Water Tube B 101--01 Specification for Lead-Coated Copper Sheet and Strip for Building Construction B 209--96 Specification for Aluminum and Aluminum Alloy Steel and Plate B 251--97 Specification for General Requirements for Wrought Seamless Copper and Copper-alloy Tube B 280--99el Specification for Seamless Copper Tube for Air Conditioning and Refrigeration Field Service B 633--98 Specification for Electrodeposited Coatings of Zinc on Iron and Steel C 5--97 Specification for Quicklime for Structural Purposes C 22/C Specification for Gypsum 22M--00 C 27--98 Specification for Standard Classification of Fireclay and High-Alumina Refractory Brick C 31/31M--98 Practice for Making and Curing Concrete Test Specimens in the Field C 33--99ael Specification for Concrete Aggregates C 33--01a Specification for Concrete Aggregates C 34--96 Specification for Structural Clay Load-bearing Wall Tile (2001) C 35--95 Specification for Inorganic Aggregates for Use in (2001) Gypsum Plaster C 36/C 36M-01 Specification for Gypsum Wallboard C 37/C 37M-01 Specification for Gypsum Lath C 39--99ael Test Method for Compressive Strength of Cylindrical Concrete Specimens C 42/C Test Method for Obtaining and Testing Drilled Cores 42M--99 and Sawed Beams of Concrete C 55--01A Specification for Concrete Brick C 56--96 Specification for Structural Clay Non-load Bearing Tile (2001) C 59/C 59M--00 Specification for Gypsum Casting and Molding Plaster C 61/C 61M--00 Specification for Gypsum Keene's Cement C 62--01 Specification for Building Brick (Solid Masonry Units Made from Clay or Shale) C 67--02 Test Methods of Sampling and Testing Brick and Structural Clay Tile C 73--99a Specification for Calcium Silicate Face Brick (Sand-lime Brick) C 79--01 Specification for Treated Core and Non-treated Core Gypsum Sheathing Board C 90--01A Specification for Loadbearing Concrete Masonry Units C 91--01 Specification for Masonry Cement C 94/C 94M--00 Specification for Ready-Mixed Concrete C 126--99 Specification for Ceramic Glazed Structural Clay Facing Tile, Facing Brick, and Solid Masonry Units C 140--01 ael Test Method Sampling and Testing Concrete Masonry Units and Related Units C 150--99a Specification for Portland Cement C 150--01 Specification for Portland Cement C 172--99 Practice for Sampling Freshly Mixed Concrete C 199--84 Test Method for Pier Test for Refractory Mortars (2000) C 206--84 Specification for Finishing Hydrated Lime (1997) C 207--97 Specification for Hydrated Lime for Masonry Purposes C 208--95 Specification for Cellulosic Fiber Insulating Board C 212--00 Specification for Structural Clay Facing Tile C 216--01A Specification for Facing Brick (Solid Masonry Units Made from Clay or Shale) C 270--01A Specification for Mortar for Unit Masonry C 315--00 Specification for Clay Flue Linings C 317/C Specification for Gypsum Concrete 317M--00 C 330--99 Specification for Lightweight Aggregates for Structural Concrete C 331--01 Specification for Lightweight Aggregates for Concrete Masonry Units C 406--00 Specification for Roofing Slate C 442/C Specification for Gypsum Backing Board and Coreboard 442M--01 and Gypsum Shaftliner Board C 472--99 Specification for Standard Test Methods for Physical Testing of Gypsum, Gypsum Plasters and Gypsum Concrete C 473--00 Test Method for Physical Testing of Gypsum Panel Products C 474--01 Test Methods for Joint Treatment Materials for Gypsum Board Construction C 475--01 Specification for Joint Compound and Joint Tape for Finishing Gypsum Wallboard C 476--01 Specification for Grout for Masonry C 503--99e01 Specification for Marble Dimension Stone (Exterior) C 514--01 Specification for Nails for the Application of Gypsum Board C 516--E01 Specifications for Vermiculite Loose Fill Thermal Insulation C 547--00 Specification for Mineral Fiber Pipe Insulation C 549--81 Specification for Perlite Loose Fill Insulation (1995) C 557--99 Specification for Adhesives for Fastening Gypsum Wallboard to Wood Framing C 568--99 Specification for Limestone Dimension Stone C 587--97 Specification for Gypsum Veneer Plaster C 588/C Specification for Gypsum Base for Veneer Plasters 588M--01 C 595--00 Specification for Blended Hydraulic Cements C 595--01 Specification for Blended Hydraulic Cements C 615--99 Specification for Granite Dimension Stone C 616--99 Specification for Quartz-based Dimension Stone C 618--99 Specification for Coal Fly Ash and Raw or Calcined Natural Pozzolan for Use as a Mineral Admixture in Concrete C 629--99 Specification for Slate Dimension Stone C 630/C Specification for Water-resistant Gypsum Backing Board 630M--01 C 631--00 Specification for Bonding Compounds for Interior Gypsum Plastering C 635--00* Specification for the Manufacturer, Performance, and Testing of Metal Suspension Systems for Acoustical Tile and Lay-in Panel Ceilings C 636--96* Practice for Installation of Metal Ceiling Suspension Systems for Acoustical Tile and Lay-in Panels C 645--00 Specification for Nonstructural Steel Framing Members C 652--01A Specification for Hollow Brick (Hollow Masonry Units Made from Clay or Shale) C 685/C Specification for Concrete Made by Volumetric Batching 685M--98a and Continuous Mixing C 744--99 Specification for Prefaced Concrete and Calcium Silicate Masonry Units C 754--00 Specification for Installation of Steel Framing Members to Receive Screw-attached Gypsum Panel Products C 836--00 Specification for High-solids Content, Cold Liquid-applied Elastomeric Waterproofing Membrane for Use with Separate Wearing Course C 840--01 Specification for Application and Finishing of Gypsum Board C 841--99 Specification for Installation of Interior Lathing and Furring C 842--99 Specification for Application of Interior Gypsum Plaster C 843--99 Specification for Application of Gypsum Veneer Plaster C 844--99 Specification for Application of Gypsum Base to Receive Gypsum Veneer Plaster C 845--96 Specification for Expansive Hydraulic Cement C 847--00 Specification for Metal Lath C 887--(2001) Specification for Packaged, Dry Combined Materials for Surface Bonding Mortar C 897--00 Specification for Aggregate for Job-Mixed Portland Cement-Based Plasters C 926--98a Specification for Application of Portland Cement Based-Plaster C 931/C Specification for Exterior Gypsum Soffit Board 931M--01 C 932--98a Specification for Surface-applied Bonding Agents for Exterior Plastering C 933--A (2001) Specification for Welded Wire Lath C 946--91 Specification for Practice for Construction of (2001) Dry-stacked, Surface-bonded Walls C 954--00 Specification for Steel Drill Screws for the Application of Gypsum Panel Products or Metal Plaster Bases to Steel Studs from 0.033 inch (0.84 mm) to 0.112 inch (2.84 mm) in Thickness C 955--01 Specification for Load Bearing Transverse and Axial Steel Studs, Runners Tracks, and Bracing or Bridging, for Screw Application of Gypsum Panel Products and Metal Plaster Bases C 956--97 Specification for Installation of Cast-in-place Reinforced Gypsum Concrete C 957--98 Specification for High-solids Content, Cold Liquid-applied Elastomeric Waterproofing Membrane with Integral Wearing Surface C 960--97 Specification for Predecorated Gypsum Board C 989--99 Specification for Ground Granulated Blast-furnace Slag for Use in Concrete and Mortars C 1002--01 Specification for Steel Self-Piercing Tanning Screws for the Application of Gypsum Panel Products or Metal Plaster Bases to Wood Studs or Steel Studs C1007--00 Specification for Installation of Load Bearing (Transverse and Axial) Steel Studs and Related Accessories C 1019--00B Test Method of Sampling and Testing Grout C 1029--96 Specification for Spray-applied Rigid Cellular Polyurethane Thermal Insulation C 1032--96 Specification for Woven Wire Plaster Base C 1047--99 Specification for Accessories for Gypsum Wallboard and Gypsum Veneer Base C 1063--99 Specification for Installation of Lathing and Furring to Receive Interior and Exterior Portland Cement Based Plaster C 1088--01A Specification for Thin Veneer Brick Units Made from Clay or Shale C 1157--00 Performance Specification for Hydraulic Cement C 1167--96 Specification for Clay Roof Tiles C 1177/ Specification for Glass Mat Gypsum Substrate for Use as C 1177M--01 Sheathing C 1178/ Specification for Glass Mat Water-resistant Gypsum Backing C 1178M--01 Panel C 1186--99 Specification for Flat Nonasbestos Fiber Cement Sheets C 1218/ Test Method for Water-soluble Chloride in Mortar and C 1218M--99 Concrete C 1240--00E1 Specification for Silica Fume for Use as a Mineral Admixture in Hydraulic-Cement Concrete, Mortar and Grout C 1261-98 Specification for Firebox Brick for Residential Fireplaces C 1278/ Specification for Fiber-reinforced Gypsum Panels 1278M--01 C 1280--99 Specification for Application of Gypsum Sheathing C 1283--00 Practice for Installing Clay Flue Liners C 1314--02 Test Method for Compressive Strength of Masonry Prisms C 1328--00 Specification for Plastic (Stucco Cement) C 1329--00 Specification for Mortar Cement C 1395/ Specification for Gypsum Ceiling Board 1395M--01 D 25--99E01 Specification for Round Timber Piles D 41--E01 Specification for Asphalt Primer Used in Roofing, Dampproofing and Waterproofing D 43--00 Coal Tar Primer Used in Roofing, Dampproofing, and Waterproofing D 56--01 Test Method for Flash Point By Tag Closed Tester D 86--01e01 Test Method for Distillation of Petroleum Products D 93--00 Test Method for Flash Point By Pensky-Martens Closed Cup Tester D 224--89 Specification for Smooth-Surfaced Asphalt Roll Roofing (1996) (Organic Felt) D 225--01 Specification for Asphalt Shingles (Organic Felt) Surfaced with Mineral Granules D 226--97a Specification for Asphalt-Saturated Organic Felt Used in Roofing and Waterproofing D 227--97a Specification for Coal-tar-saturated Organic Felt Used in Roofing and Waterproofing D 249--89 Specification for Asphalt Roll Roofing (1996) (Organic Felt) Surfaced with Mineral Granules D 312--00 Specification for Asphalt Used in Roofing D 371--89 Specification for Asphalt Roll Roofing (Organic Felt) (1996) Surfaced with Mineral Granules: Wide-selvage D 422--98 Test Method for Particle-size Analysis of Soils D 450--00 Specification for Coal-tar Pitch Used in Roofing, Dampproofing and Waterproofing D 635--98 Test Method for Rate of Burning and/or Extent and Time of Burning of Self-Supporting Plastics in a Horizontal Position D 1143--81 Test Method for Plies Under Static Axial Compressive (1994) E01 Load D 1227--00 Specification for Emulsified Asphalt Used as a Protective Coating for Roofing D 1557--00 Test Method for Laboratory Compaction Characteristics of Soil Using Modified Effort (56,000 ft-lb)/ft[3](2,700 KN m/m[3])) D 1586--99 Specification for Penetration Test and Split-barrel Sampling of Soils D 1761--88 Test Method for Mechanical Fasteners in Wood (2000) D 1863--93 Specification for Mineral Aggregate Used on Built-up (2000) Roofs D 1929--96 Test Method for Determining Ignition Properties of (2001)E01 Plastics D 1970--01 Specification for Self-Adhering Polymer Modified Bituminous Sheet Materials Used as Steep Roof Underlayment for Ice Dam Protection D 2166--00 Test Method for Unconfined Compressive Strength of Cohesive Soil D 2178--97a Specification for Asphalt Glass Felt Used in Roofing and Waterproofing D 2216--98 Test Method for Laboratory Determination of Water (Moisture) Content of Soil and Rock by Mass D 2487--00 Practice for Classification of Soils for Engineering Purposes (Unified Soil Classification System) D 2626--97b Specification for Asphalt Saturated and Coated Organic Felt Base Sheet Used in Roofing D 2822--91 Specification for Asphalt Roof Cement (97)el D 2823--90 Specification for Asphalt Roof Coatings (97)el D 2843--99 Test for Density of Smoke from the Burning or Decomposition of Plastics D 2850--95 Test Method for Unconsolidated, Undrained Triaxial (1999) Compression Test on Cohesive Soils D 2898--94 Test Methods for Accelerated Weathering of Fire- (1999) Retardant-Treated Wood for Fire Testing D 3019--e01 Specification for Lap Cement Used with Asphalt Roll (Supp) Roofing, Nonfibered, Asbestos Fibered, and Nonasbestos Fibered D 3161--99a Test Method for a Wind Resistance of Asphalt Shingles (Fan Induced Method) D 3201--94 Test Method for Hygroscopic Properties of Fire- (1998)el Retardant Treated Wood and Wood-base Products D 3278--96e01 Test Methods for Flash Point of Liquids by Small Scale Closed-Cup Apparatus D 3462--E01 Specification for Asphalt Shingles Made from Glass Felt and Surfaced with Mineral Granules D 3468--99 Specification for Liquid-applied Neoprene and Chlorosulfonated Polyethylene Used in Roofing and Waterproofing D 3679--01c Specification for Rigid Poly (Vinyl Chloride (PVC) Siding) (Supp) D 3689--90 Method for Testing Individual Piles Under Static Axial (1995) Tensile Load D 3737--01B Practice for Establishing Allowable Properties for Structural Glued Laminated Timber (Glulam) D 3746--85 Test Method for Impact Resistance of Bituminous (1996)el Roofing Systems D 3747--E01 Specification for Emulsified Asphalt Adhesive for Adhering Roof Insulation D 3909--97b Specification for Asphalt Roll Roofing (Glass Felt) Surfaced with Mineral Granules D 4022--00 Specification for Coal Tar Roof Cement, Asbestos Containing D 4272--99 Test Method for Total Energy Impact of Plastic Films by Dart Drop D 4318--00 Test Methods for Liquid Limit, Plastic Limit, and Plasticity Index of Soils D 4434--96 Specification for Poly (Vinyl Chloride) Sheet Roofing D 4479--00 Specification for Asphalt Roof Coatings - Asbestos-Free D 4586--00 Specification for Asphalt Roof Cement, Asbestos-Free D 4601-98 Specification for Asphalt-Coated Glass Fiber Base Sheet Used in Roofing D 4637--96 Specification for EPDM Sheet Used in Single-ply Roof Membrane D 4829--95 Test Method for Expansion Index of Soils D 4869--93 Specification for Asphalt-Saturated (Organic Felt) Underlayment Used in Steep Slope Roofing D 4897--01 Specification for Asphalt-Coated Glass Fiber Venting Base Sheet Used in Roofing D 4990--97a Specification for Coal Tar Glass Felt Used in Roofing and Waterproofing D 4945--00 Test Method for High-Strain Dynamic Testing of Piles P D 5019--96 Specification for Reinforced Nonvulcanized Polymeric Sheet Used in Roofing Membrane D 5055--00 Specification for Establishing and Monitoring Structural Capacities of Prefabricated Wood I-joists D 5456--01 Specification for Evaluation of Structural Composite AE01 Lumber Products D 5516--99a Test Method of Evaluating the Flexural Properties of Fire-Retardant Treated Softwood Plywood Exposed to the Elevated Temperatures D 5643--00 Specification for Coal Tar Roof Cement, Asbestos-Free D 5664--01 Test Methods for Evaluating the Effects of Fire-Retardant Treatment and Elevated Temperatures on Strength Properties of Fire-Retardant Treated Lumber D 5665--99a Specification for Thermoplastic Fabrics Used in Cold-Applied Roofing and Waterproofing D 5726--98 Specification for Thermoplastic Fabrics Used in Hot-Applied Roofing and Waterproofing D 6083--97a Specification for Liquid Applied Acrylic Coating Used in Roofing D 6162-00A Specification for Styrene Butadiene Styrene (SBS) Modified Bituminous Sheet Materials Using a Combination of Polyester and Glass Fiber Reinforcements D 6163--00 Specification for Styrene Butadiene Styrene (SBS) Modified Bituminous Sheet Materials Using Glass Fiber Reinforcements D 6164--00 Specification for Styrene Butadiene Styrene (SBS) Modified Bituminous Sheet Metal Materials Using Polyester Reinforcements D 6222--98 Specification for Atactic Polypropylene (APP) Modified Bituminous Sheet Materials Using Polyester Reinforcements D 6223--98 Specification for Atactic Polypropylene (APP) Modified Bituminous Sheet Materials Using a Combination of Polyester and Glass Fiber Reinforcements D 6298--98 Specification for Fiberglass Reinforced Styrene- Butadiene-Styrene (SBS) Modified Bituminous Sheets with a Factory Applied Metal Surface D 6305-99e1 Practice for Calculating Bending Strength Design Adjustment Factors for Fire-Retardant-Treated Plywood Roof Sheathing E 84--01 Test Methods for Surface Burning Characteristics of Building Material E 90--99 Test Method for Laboratory Measurement of Airborne Sound Transmission Loss of Building Partitions and Elements E96--00 Test Method for Water Vapor Transmission of Materials E 108--00 Test Methods for Fire Tests of Roof Coverings E 119--00 Test Methods for Fire Tests of Building Construction and Materials E 136-99 Test Method for Behavior of Materials in a Vertical Tube Furnace at 750°C E 328--86 Methods for Stress Relaxation for Materials and Structures E 330--97 Test Method for Structural Performance of Exterior Windows, Curtain Walls, and Doors by Uniform Static Air Pressure Difference F 331--00 Test Method for Water Penetration of Exterior Windows, Skylights, Doors, and Curtain Walls by Uniform Static Air Pressure Difference E 336--05 Standard Test Method for Measurement of Airborne Sound Insulation in Buildings E 492--90 Test Method for Laboratory Measurement of Impact Sound (1996)el Transmission Through Floor-ceiling Assemblies Using the Tapping Machine E 605--00 Test Method for Thickness and Density of Sprayed Fire- resistive Material (SFRM) Applied to Structural Members E 681--01 Test Methods for Concentration Limits of Flammability of Chemical Vapors and Gases E 736--00 Test Method for Cohesion/Adhesion of Sprayed Fire- resistive Materials Applied to Structural Members E 814--00 Test Method of Fire Tests of Through-penetration Firestops E 970--00 Test Method for Critical Radiant Flux of Exposed Attic Floor Insulation Using a Radiant Heat Energy Source E 1007--97 Test Method for Field Measurement of Tapping Machine Impact Sound Transmission through Floor-Ceiling Assemblies and Associated Support Structures E 1300--00 Practice for Determining Load Resistance of Glass in Buildings E 1592--01 Test Method for Structural Performance of Sheet Metal Roof and Siding Systems by Uniform Static Air Pressure Difference E 1602--01 Guide for Construction of Solid Fuel-Burning Masonry Heaters E 1886--97 Test Method for Performance of Exterior Windows, Curtain Wall, Doors and Storm Shutters Impacted by Missiles and exposed to Cyclic Pressure Differentials E 1966--00 Test Method for Fire-Resistant Joint Systems E 1996--01 Specification for Performance of Exterior Windows, Glazed Curtain Walls, Doors and Storm Shutters Impacted by Windborne Debris in Hurricanes F 547--01 Terminology of Nails for Use with Wood and Wood-base Materials F 1346--91 Performance Specification for Safety Covers and Labeling (1996) Requirements for All Covers for Swimming Pools, Spas and Hot Tubs F1667--01A Specification for Driven Fasteners: Nails, Spikes, and Staples G 152--00A Practice for Operating Open Flame Carbon Arc Light Apparatus for Exposure of Nonmetallic Materials G 151--00A Practice for Operating Fluorescent Light Apparatus for UV Exposure of Nonmetallic Materials G 155--00A Practice for Operating Xenon Arc Light Apparatus for Exposure of Non-Metallic Materials *As modified in Appendix R, where applicable pursuant to Section 803.9 American Wood-Preservers' Association AWPA P.O. Box 5690 Grandbury, TX 76049 ________________________________________________________________________ Standard Reference Number Title ------------------------------------------------------------------------ C1--00 All Timber Products--Preservative Treatment by Pressure Processes C2--01 Lumber, Timber, Bridge Ties and Mine Ties--Preservative Treatment by Pressure Processes C3--99 Piles--Preservative Treatment by Pressure Processes C4--99 Poles--Preservative Treatment by Pressure Processes C9--00 Plywood--Preservative Treatment by Pressure Processes C14--99 Wood for Highway Construction, Pressure Treatment by Pressure Process C15--00 Wood for Commercial-Residential Construction Preservative Treatment by Pressure Process C16--00 Wood Used on Farms, Pressure Treatment by Pressure Process C18--99 Standard for Pressure Treated Material in Marine Construction C22--96 Lumber and Plywood for Permanent Wood Foundations-- Preservative Treatment by Pressure Processes C23--00 Round Poles and Posts Used in Building Construction-- Preservative Treatment by Pressure Processes C24--96 Sawn Timber Piles Used to Support Residential and Commercial Structures C28--99 Standard for Preservative Treatment by Pressure Process of Structural Glued Laminated Members and Laminations before Gluing C31--00 Lumber Used Out of Contact with the Ground and Continuously Protected from Liquid Water--Treatment by Pressure Processes C33--00 Standard for Preservative Treatment of Structural Composite Lumber by Pressure Processes M4--01 Standard for the Care of Preservative-Treated Wood Products P1/13--01 Standard for Creosote Preservative P2--01 Standard for Creosote Solutions P5--01 Standard for Waterborne Preservatives P8--01 Standard for Oil-borne Preservatives P9--01 Standard for Solvents and Formulations for Organic Preservative Systems American Welding Society AWS 550 N.W. LeJeune Road Miami, FL 33126 ________________________________________________________________________ Standard Reference Number Title ------------------------------------------------------------------------ D1.1--00 Structural Welding Code--Steel D1.3--98 Structural Welding Code--Sheet Steel D1.4--98 Structural Welding Code--Reinforcing Steel Builders Hardware Manufacturers' Association BHMA 355 Lexington Avenue, 17th Floor New York, NY 10017-6603 ________________________________________________________________________ Standard Reference Number Title ------------------------------------------------------------------------ A 156.10--99 American National Standard for Power Operated Pedestrian Doors A 156.19--97 American National Standard for Power Assist and Low Energy Operated Doors Canadian General Standards Board CGSB 222 Queens Street 14th Floor, Suite 1402 Ottawa, Ontario, Canada KIA 106 ________________________________________________________________________ Standard Reference Number Title ------------------------------------------------------------------------ 37-GP-52M Roofing and Waterproofing Membrane, Sheet Applied, (1984) Elastomeric CAN/CGSB 37.54--95 Polyvinyl Chloride Roofing and Waterproofing Membrane 37-GP-56M Membrane, Modified, Bituminous, Prefabricated, and (1980) Reinforced for Roofing--with December 1985 Amendment Consumer Product Safety Commission CPSC 4330 East West Highway Bethesada, M D 20814-4408 ________________________________________________________________________ Standard Reference Number Title ------------------------------------------------------------------------ 16 CFR Part Safety Standard for Architectural Glazing Material 1201(1977) 16 CFR Part Interim Safety Standard for Cellulose Insulation 1209(1979) 16 CFR Part Cellulose Insulation 1404(1979) 16 CFR Part Hazardous Substances and Articles: Administration 1500(1991) and Enforcement Regulations 16 CFR Part Method for Determining Extremely Flammable and Flammable 1500.44(2001) Solids 16 CFR Part Fireworks Devices 1507(2001) 16 CFR Part Standard for the Surface Flammability of Carpets and Rugs 1630(2000) Cedar Shake and Shingle Bureau CSSB P.O. Box 1178 Sumas, WA 98295-1178 ________________________________________________________________________ Standard Reference Number Title ------------------------------------------------------------------------ CSSB--97 Grading and Packing Rules for Western Red Cedar Shakes and Western Red Shingles of the Cedar Shake and Shingle Bureau Door and Access Systems Manufacturers DASMA Association International 1300 Summer Avenue Cleveland, OH 44115-2851 ________________________________________________________________________ Standard Reference Number Title ------------------------------------------------------------------------ 107-97 Room Fire Test Standard for Garage Doors Using Foam Plastic Insulation U.S. Department of Commerce DOC National Institute of Standards and Technology 100 Bureau Drive Stop 3460 Gaithersburg, MD 20899 ________________________________________________________________________ Standard Reference Number Title ------------------------------------------------------------------------ PS-1--95 Construction and Industrial Plywood PS-2--92 Performance Standard for Wood-based Structural-use Panels PS 20--99 American Softwood Lumber Standard U.S. Department of Labor DOL c/o Superintendent of Documents U.S. Government Printing Office Washington, DC 20402-9325 ________________________________________________________________________ Standard Reference Number Title ------------------------------------------------------------------------ 29 CFR Part Air Contaminants 1910.1000 (1974) U.S. Department of Transportation DOTn c/o Superintendent of Documents U.S. Government Printing Office Washington, DC 20402-9325 ________________________________________________________________________ Standard Reference Number Title ------------------------------------------------------------------------ 49 CFR Part Hazardous Materials Tables, Special Provisions, Hazardous 172 (1999) Materials Communications, Emergency Response Information and Training Requirements 49 CFR Parts Specification of Transportation of Explosive and Other 173 (1999) Dangerous Articles, UN 0335, UN 0336 Shipping Containers Federal Emergency Management Agency FEMA Federal Center Plaza 500 C Street S.W. Washington, DC 20472 ________________________________________________________________________ Standard Reference Number Title ------------------------------------------------------------------------ Pub 302 NEHRP Recommended Provisions for Seismic Regulations for New Buildings and Other Structures Factory Mutual FM Standards Laboratories Department 1151 Boston-Providence Turnpike Norwood, MA 02062 ________________________________________________________________________ Standard Reference Number Title ------------------------------------------------------------------------ 4450 (1989) Approval Standard for Class I Insulated Steel Deck Roofs--with Supplements thru 7/92 4470 (1992) Approval Standard for Class 1 Roof Covers 4880 (2001) American National Standard for Evaluating Insulated Wall or Wall and Roof/Ceiling Assemblies, Plastic Interior Finish Materials, Plastic Exterior Building Panels, Wall/Ceiling Coating Systems, Interior and Exterior Finish Systems. Gypsum Association GA 810 First Street N.E. 510 Washington, DC 20002-4268 ________________________________________________________________________ Standard Reference Number Title ------------------------------------------------------------------------ GA 216--00 Application and Finishing of Gypsum Board GA 600--00 Fire-resistance Design Manual, 16th Edition, April, 2000 Hardwood Plywood Veneer Association HVPA 1825 Michael Faraday Drive Reston, VA 20190-5350 ________________________________________________________________________ Standard Reference Number Title ------------------------------------------------------------------------ HP-I--2000 The American National Standard for Hardwood and Decorative Plywood International Code Council ICC 5203 Leesburg Pike, Suite 600 Falls Church, VA 22041 ________________________________________________________________________ Standard Reference Number Title ________________________________________________________________________ ICC/ANSI Accessible and Usable Buildings and Facilities A 117.1--2003 ICC 300--02 ICC Standard on Bleachers, Folding and Telescopic Seating, and Grandstands SBCCI SSTD Standard for Hurricane Resistant Residential Construction 10--99 SBCCI SSTD Test Standard for Determining Wind Resistance of 11--97 Concrete or Clay Roof Tiles UBC Standard 18-2 Expansion Index Test National Association of Architectural Metal Manufacturers NAAMM 8 South Michigan Ave Chicago, IL 60603 ________________________________________________________________________ Standard Reference Number Title ------------------------------------------------------------------------ FP 1001--90 Guide Specifications for Design of Metal Flag Poles National Concrete Masonry Association 2302 Horse Pen Road Herndon, VA 22091-3499 ________________________________________________________________________ Standard Reference Number Title ------------------------------------------------------------------------ TEK 5-8A Details for Concrete Masonry Fire Walls (1996) National Fire Protection Association FNPA 1 Batterymarch Park Quincy, MA 02269-9101 ________________________________________________________________________ Standard Reference Number Title ------------------------------------------------------------------------ 13--02* Installation of Sprinkler Systems 13D--02* Installation of Sprinkler Systems in One- and Two-family Dwellings and Manufactured Homes 13R--02* Installation of Sprinkler Systems in Residential Occupancies Up to and Including Four Stories in Height 14--03* Installation of Standpipe. Private Hydrants and Hose System 30--00 Flammable and Combustible Liquids Code 32--00 Dry-cleaning Plants 40--97 Storage and Handling of Cellulose Nitrate Motion Picture Film 45--00 Standard on Fire Protection for Laboratories Using Chemicals 61--99 Prevention of Fires and Dust Explosions in Agricultural and Food Product Facilities 77--2002* National Fire Alarm Code 80--99 Fire Doors and Fire Windows 85--01 Boiler and Combustion System Hazards Code (Note: NFPA 8503 has been incorporated into NFPA 85) 99--05 Standard for Health Care Facilities 99c--05 Standard on Gas and Vacuum Systems 101--00 Life Safety Code 110--99 Emergency and Standby Power Systems 111--01 Stored Electrical Energy Emergency and Standby Power Systems 120--99 Coal Preparation Plants 231C--98 Rack Storage of Materials 252--99 Standard Methods of Fire Tests of Door Assemblies 253--00 Test for Critical Radiant Flux of Floor Covering Systems Using a Radiant Heat Energy Source 257--00 Standard for Fire Test for Window and Glass Block Assemblies 259--98 Test Method for Potential Heat of Building Materials 265--98 Standard Method of Fire Tests for Evaluating Room Fire Growth Contribution of Textile Wall Coverings 268-96 Standard Test Method for Determining Ignitibility of Exterior Wall Assemblies Using a Radiant Heat Energy Source 285--98 Standard Method of Test for the Evaluation of Flammability Characteristics of Exterior Non-load-bearing Wall Assemblies Containing Combustible Components 286--00 Standard Method of Fire Test for Evaluating Contribution of Wall and Ceiling Interior Finish to Room Fire Growth 409--95 Standard on Aircraft Hangers 418--01 Standard for Heliports 651--98 Machining and Finishing of Aluminum and the Production and Handling of Aluminum Powders 654--00 Prevention of Fire&Dust Explosions from the Manufacturing, Processing, and Handling of Combustible Particulate Solids 655--93 Prevention of Sulfur Fires and Explosions 664--98 Prevention of Fires Explosions in Wood Processing and Woodworking Facilities 701--99 Standard Methods of Fire Tests for Flame-Propagation of Textiles and Films 704--96 Standard System for the Identification of the Hazards of Materials for Emergency Response 1124--98 Manufacture, Transportation, and Storage of Fireworks and Pyrotechnic Articles 2001--00 Clean Agent Fire Extinguishing Systems *As modified in Appendix Q National Institute of Standards and Technology NIST U.S. Department of Commerce 100 Bureau Dr. - Stop 3460 Gaithersburg, M D 20899-3460 ________________________________________________________________________ Standard Reference Number Title ------------------------------------------------------------------------ BMS 71--41 Fire Tests of Wood and Metal-framed Partitions TRBM-44--46 Fire-resistance and Sound-insulation Ratings for Walls, Partitions and Floors Precast Prestressed Concrete Institute 175 W. Jackson Boulevard, Suite 1859 Chicago, IL, 60604-9773 ________________________________________________________________________ Standard Reference Number Title ________________________________________________________________________ MNL 124--89 Design for Fire Resistance of Precast Prestressed Concrete MNL 128--01 Recommended Practice for Glass Fiber Reinforced Concrete Panels Post-Tensioning Institute PTI 1717 W. Northern Avenue, Suite 114 Phoenix, AZ 85021 ________________________________________________________________________ Standard Reference Number Title ------------------------------------------------------------------------ Design9and Construction of Post-tensioned Slabs-on-ground, 2nd Edition Rubber Manufacturers Association RMA 1400 K. Street, N.W. #900 Washington, DC 20005 ________________________________________________________________________ Standard Reference Number Title ------------------------------------------------------------------------ RP-1--90 Minimum Requirements for Non-reinforced Black EPDM Rubber Sheets RP-2--90 Minimum Requirements for Fabric-reinforced Black EPDM Rubber Sheets RP-3--85 Minimum Requirements for Fabric-reinforced Black Polychloroprene Rubber Sheets Rack Manufacturers Institute RMI 8720 Red Oak Boulevard, Suite 201 Charlotte, NC 28217 ________________________________________________________________________ Standard Reference Number Title ------------------------------------------------------------------------ RMI (1997) Design, Testing and Utilization of Industrial Steel Storage Racks Steel Joist Institute SJI 3127 10th Avenue North Myrtle Beach, SC 29577-6760 ________________________________________________________________________ Standard Reference Number Title ------------------------------------------------------------------------ SJI--1994 Standard Specification for Joist Girders K-Series Standard Specification for Open Web Steel Joists, Specification K Series. --1994 SJI--1994 Standard Specification for Longspan Steel Joists, LH Series and Deep Longspan Steel Joists, DLH Series Single-Ply Roofing Institute SPRI 77 Rumford Ave. Suite 3-B Walthem, MA 02453 ________________________________________________________________________ Standard Reference Number Title ------------------------------------------------------------------------ ES-1--98 Wind Design Standard for Edge Systems Used with Low Slope Roofing Systems RP-4--88 Wind Design Guide for Ballasted Single-ply Roofing Systems Telecommunications Industry Association TIA 2500 Wilson Boulevard Arlington, VA 22201-3834 ________________________________________________________________________ Standard Reference Number Title ------------------------------------------------------------------------ TIA/EIA-222- Structural Standards for Steel Antenna Towers and F--96 Antenna Supporting Structures The Masonry Society 3970 Broadway, Unit 201-D Boulder, CO 80304-1135 ________________________________________________________________________ Standard Reference Number Title ------------------------------------------------------------------------ 0216--97 Standard Method for Determining Fire Resistance of Concrete and Masonry Construction Assemblies 402--02 Building Code Requirements for Masonry Structures 602--02 Specification for Masonry Structures Truss Plate Institute TPI 583 D'Onofrio Drive, Suite 200 Madison, WI 53719 ________________________________________________________________________ Standard Reference Number Title ------------------------------------------------------------------------ TPI 1--2002 National Design Standards for Metal-Plate-Connected Wood Truss Construction Underwriters Laboratories UL 333 Pfingsten Road Northbrook, IL 60062-2096 ________________________________________________________________________ Standard Reference Number Title ------------------------------------------------------------------------ 10A--98 Tin Clad Fire Doors--with Revisions through July, 1998 10B--97 Fire Tests of Door Assemblies 10C--98 Positive Pressure Fire Tests of Door Assemblies--with Revisions thru November, 2001 14B--98 Sliding Hardware for Standard Horizontally Mounted Tin Clad Fire Doors--with Revisions through July, 2000 14C--96 Swinging Hardware for Standard Tin Clad Fire Doors Mounted Singly and in Pairs 103--98 Factory-Built Chimneys, for Residential Type and Building Heating Appliances--with Revisions through March 1999 127--99 Factory-Built Fireplaces--with Revisions through November, 1999 268--96 Smoke Detectors for Fire Protective Signaling Systems--with Revisions through January, 1999 300--96 Fire Testing of Fire Extinguishing Systems for Protection of Restaurant Cooking Areas--with Revisions through December, 1998 555--96 Fire Dampers--with Revisions through October, 2000 555C--96 Ceiling Dampers 555S--99 Smoke Dampers--with Revisions through December, 1999 580--94 Test for Uplift Resistance of Roof Assemblies--with Revisions through February, 1998 641--95 Type L Low-Temperature Venting Systems--with Revisions through April, 1999 790--97 Tests for Fire Resistance of Roof Covering Materials--with Revisions through July, 1998 864--96 Control Units for Fire Protective Signaling Systems--with Revisions through March, 1999 1040--96 Fire Test of Insulated Wall Construction--with Revisions thru April, 2001 1256--98 Fire Test of Roof Deck Construction--with Revisions through March, 2000 1479--94 Fire Tests of Through-Penetration Firestops 1715--97 Fire Test of Interior Finish Material 1777--98 Chimney Liners--with Revisions through July, 1998 1784--95 Air Leakage Tests of Door Assemblies 1897--98 Uplift Tests for Roof Covering Systems--with Revisions through December, 1999 1975--96 Fire Test of Foamed Plastics Used for Decorative Purposes 2034--96, Standard for Single and Multiple Station Carbon Monoxide revised Alarms 3/8/05 2075--04, Standard for Gas and Vapor Detectors and Sensors revised 7/20/05 2079--98 Tests for Fire Resistance of Building Joint Systems 2200--98 Stationary Engine Generator Assemblies Underwriters Laboratories of Canada ULC 7 Crouse Road Scarborough, Ontario, Canada M1R3A9 ________________________________________________________________________ Standard Reference Number Title ------------------------------------------------------------------------ S 102.2--M88 Standard Method of Test for Surface Burning Characteristics of Floor Coverings, and Miscellaneous Materials and Assemblies United States Code USC c/o Superintendent of Documents U.S. Government Printing Office Washington, DC 20402-9325 ________________________________________________________________________ Standard Reference Number Title ------------------------------------------------------------------------ 18 USC Part 1, Ch.40 Importation, Manufacture, Distribution and Storage of Explosive Materials Window and Door Manufacturers Association WDMA 1400 East Touhy Avenue #470 Des Plaines, IL 60018 ________________________________________________________________________ Standard Reference Number Title ------------------------------------------------------------------------ AAMA/NWWDA Voluntary Specifications for Aluminum, Vinyl (PVC) 101.I.S.2--97 and Wood Windows and Glass Doors AAMA/NWWDA Voluntary Performance Specification for Window, 101/I.S.2/ Skylights and Glass Doors NAFS--02 Wire Reinforcement Institute, Inc. WRI 203 Loudon Street, S.W. 2nd Floor, Suite 203C Leesburg, VA 22075 ________________________________________________________________________ Standard Reference Number Title ------------------------------------------------------------------------ WRI/CRSI--96 Design of Slab-on-ground Foundations